Drain Cleaning in Enterprise, AL

Not every clog needs a plumber, and not every clog is just a clog. The pattern of which drains are slow tells you a lot. Here's how to read it, what you can safely try yourself, and when to call (334) 214-1303 for a local plumber.

Call (334) 214-1303

One drain or all of them?

One fixture is slow (a bathroom sink, one shower): the clog is almost always in that fixture's trap or branch line. Hair, soap, and toothpaste are the usual causes.
The kitchen sink is slow: grease and food waste. It often gets worse gradually, then stops completely.
Several fixtures are slow, or the toilet gurgles when the washer drains: the problem is likely further down, in the main drain or sewer line. That is a job for a plumber with a main-line machine and, ideally, a camera. See sewer line problems.
Drains back up only after heavy rain: this can point to a damaged sewer line letting groundwater in, or a septic system that's saturated.

What you can try first

A plunger made for the fixture (a flat cup for sinks and tubs, a flange plunger for toilets). Cover the overflow hole on sinks and tubs.
Pull the stopper and clear hair from bathroom sink and tub drains by hand or with a cheap plastic drain strip.
Clean the P-trap under a sink: put a bucket underneath, unscrew the slip nuts, and rinse it out.

Be careful with chemical drain openers. They rarely clear a full blockage, they can damage older pipes, and they make the job hazardous for whoever opens the drain next. Tell the plumber if you've already used one.

Typical price ranges (third-party estimate)

A national cost-guide site lists these ranges for the Dothan, AL area: snaking a single bathroom drain at about $100–$200, a kitchen sink drain at about $100–$225, and snaking a main sewer line at about $150–$350 (plumber-cost-guide.com: Water heater replacement cost, Dothan, AL (third-party estimate)). These are estimates published by that site, not quotes. Prices from plumbers in Enterprise may be higher or lower, so ask for the price before work begins.

Keeping drains clear

Wipe grease into the trash instead of the sink.
Use hair catchers in showers and tubs.
Don't flush "flushable" wipes, paper towels, or feminine products.
If you are on a septic system, have the tank pumped on the schedule your septic contractor recommends; a full tank can look like a clogged drain.

Where we can help

Drain Cleaning requests are taken from Enterprise, Ozark, Daleville, Dothan and nearby communities.

Frequently asked questions

Why does my toilet gurgle when the washing machine drains?

Water draining from the washer is having trouble getting past a partial blockage further down the line, so it pulls air through the toilet. That usually means the main drain needs cleaning rather than the toilet itself.

Should I use a chemical drain cleaner?

It's best not to on a fully blocked drain. The chemical sits in the pipe, can damage older plumbing, and is a hazard for the plumber. Try a plunger or cleaning the trap first.

Is hydro-jetting better than snaking?

They solve different problems. A snake (auger) punches through a blockage; jetting uses high-pressure water to scour grease and buildup off the pipe walls. A plumber will usually recommend one after seeing the line, sometimes with a camera.

How much does drain cleaning cost near Enterprise?

One third-party cost guide lists roughly $100–$200 for a single bathroom drain and $150–$350 for snaking a main line in the Dothan area. Local quotes can differ, so ask before work starts.

Sources for these answers: plumber-cost-guide.com: Water heater replacement cost, Dothan, AL (third-party estimate)